SCK-300 / 300P / 300S Specification

Specification

SCK-300

SCK-300P

SCK-300S

Spin speed 500 - 6,000 rpm ± 50 rpm steps 500 - 8,000 rpm ± 50 rpm steps 10 - 1,000 rpm ± 10 rpm steps
Spin speed accuracy ± 5 rpms ± 5 rpms ± 5 rpms
Spin rotational direction Clockwise Clockwise Clockwise
Max. acceleration N/A (Fixed) N/A (Fixed) N/A (Fixed)
Spin time Unlimited Unlimited Unlimited
Number of Ramp programs 3 3 3
Steps per program 2 (Low/High Speed) 2 (Low/High Speed) 2 (Low/High Speed)
Housing material Polypropylene (CD - Cakebox) Polypropylene (CD - Cakebox) Polypropylene (CD - Cakebox)
Interface Seperate STV3S Controller Seperate STV3S Controller Seperate STV3S Controller
External connection 1 UART 4 Pin Male Header 1 UART 4 Pin Male Header 1 UART 4 Pin Male Header
Aluminum Chuck Size 50 mm (d) / 2 in 50 mm (d) / 2 in 50 mm (d) / 2 in
Max. substrate diameter 100 mm round or 75 mm x 75 mm square
(4 in round or 3 in x 3 in square)
100 mm round or 75 mm x 75 mm square
(4 in round or 3 in x 3 in square)
100 mm round or 75 mm x 75 mm square
(4 in round or 3 in x 3 in square)
Min. substrate diameter N/A 20 mm round or 15mm x 15mm square 20 mm round or 15mm x 15mm square
Substrate hold system Double Sided Tape Vacuum or Double Sided Tape Vacuum or Double Sided Tape
Dimension 155 mm (d) x 100 mm (h) / 6 in. (d) x 4 in. 155 mm (d) x 100 mm (h) / 6 in. (d) x 4 in. 155 mm (d) x 100 mm (h) / 6 in. (d) x 4 in.
Shipping weight 1.4 kgs (3lbs) 1.4 kgs (3lbs) 1.4 kgs (3lbs)
Shipping dimension 254 x 204 x 152 mm / 10 x 8 x 6 in 254 x 204 x 152 mm / 10 x 8 x 6 in 254 x 204 x 152 mm / 10 x 8 x 6 in
Voltage 100 - 240 VAC 50/60 Hz (universal power adapter) 100 - 240 VAC 50/60 Hz (universal power adapter) 100 - 240 VAC 50/60 Hz (universal power adapter)
Power consumption 15 W 15 W 15 W
Max. current 1A 1A 1A
Vacuum N/A - 55 kPa (-25 inchHg), ≥ 50 lpm Tube OD Ø10mm - 55 kPa (-25 inchHg), ≥ 50 lpm Tube OD Ø10mm
Motor purge gas N/A N/A N/A
Drain connection N/A N/A N/A